SMPTE LED DISPLAYS - READERS & GENERATORS
VLR-100 $679
Picture 
VITC/LTC Reader/LTC Generator/LED Display
Combination VITC/LTC time code reader/LTC generator with a .56" high, 8-digit LED display readout.
Reads LTC from 1/30 to 100 times play speed, forward and reverse. Reads VITC from pause to over 30 times play speed forward and reverse (depending on tape format)
Displays hours, minutes, seconds, and frames, plus indicators for VITC or LTC, and drop/non-drop frame format
Brightness control adjusts display intensity
Front panel switches for selecting time code/user bit data display, display run-hold operation, RDR/GEN/SET, and VITC/LTC, or "auto" mode which uses VITC as backup when reading LTC
LTC generator outputs drop frame/non-drop frame LTC and/or translates VITC into LTC
Outputs 2 volt P-P reshaped LTC when reading LTC
Optional hardware available for wall or rackmount.
VLR-100PC $799
Picture
VITC/LTC Reader/LTC Generator/LED Display/Tape Logging Software
All features of the VLR-100
PLUSHORITA TC-TOOLKIT tape logging software and RS-232 cable **
TCD-100 $499
Picture
VITC/LTC Reader/LED Display
Combination high speed LTC and VITC time code reader with 0.8" high LED display characters suitable for viewing across a room.
Reads LTC from 1/30 to 100 times play speed, forward and reverse. Reads VITC from pause to over 30 times play speed forward and reverse (depending on tape format).
All switches are located at rear of unit. "Auto" LTC-VITC select mode permits unattended operation by automatically switching to VITC when LTC is not available.
Displays hours, minutes, seconds, and frames, plus indicators for VITC or LTC, and drop/non-drop frame format
Switch select time code/user bit display, display run/hold
Brightness control adjusts display intensity for indoor use in a darkened room or outdoor use in bright light
Outputs 2 volt P-P reshaped LTC when reading LTC
Optional hardware available for wall or rackmount.
TR-100 $449
Picture
LED Display Time Code Reader
The TR-100 is a search LTC reader featuring an adjustable brightness 0.8 inch LED display. The brightness control allows comfortable use in bright light or in a dimly lit studio, while the 0.8" character height is good for up close or across the room viewing. The TR-100 also translates LTC time code into Midi Time Code (MTC) for use in the audio/video workshop. TR-100 features include:
Reads at speeds from 1/30 to over 10x play speed, forward and reverse
Auto selects between 24 FPS (film), 25 FPS (PAL), 29.97 (NTSC drop frame) and 30 FPS (audio) time codes (FPS: frames-per-second)
Outputs reshaped time code for time code copying needs
Operates from 9 volt DC, supplied with an AC adapter
Measures 1.5"H x 8.5"W x 3.25"D and can be can be rack or wall mounted by using an appropriate adapter kit.
TCC-100 $449
Picture
Dual Input Time Code Comparator
The TCC-100 is a dual input time code reader that compares two LTC inputs and displays their difference on an LED display. The TCC-100 can be used to monitor or verify proper operation of various time code equipment, or simply display the time offset between two time code sources.
Hrs/Min/Sec/Frm coarse compare resolution or .1/.01 Frm fine resolution.
Green LED "Match" indicator and GPI out with selectable 0, 1/2, or 1 frame tolerance.
Select displays of time code or user bits for two separate time code inputs.
Elapsed Time Display
The ETD-100 is a 0.8"H LED display timer that can be used to time various situations and events such as talent, speakers, presentations, experiments, etc. The LED display has a brightness control and is large enough to be read across a room.
-
Counts up or down.
-
Outputs a "GPI" signal when the count reaches zero.
-
Actuated via simple local or remote switch closure inputs to initiate timing sequences of reset/count-up/stop and preset/count-down/stop.
-
Local and remote setup of the preset time is also available and all counter setup information is retained in non-volatile memory.
-
Display of tenths and hundredths of a second can be turned on or off.
Power Solutions
BP-50 $59 | IPA-91 $33 International Power Adapter More Info... |
Cables & Accessories
| CK1 $18.75 RCA cable assortment More Info... | AK1 $8.95 RCA-BNC More Info... |
| CK2 $16.75 BNC cable assortment More Info... | AK2 $10.50 XLR-RCA More Info... |
| CK3 $14.00 PS2 cable More Info... | AK3 $3.00 RCA "Y" adapter cables More Info... |
| CK4 $16.00 PS2 cable More Info... | AK4 $3.75 3.5mm "Y" Mini Phone Adapter Cable More Info... |
| CK5 $16.00 DB9 adapter cable More Info... | CK6 $18.00 DB9 adapter cable More Info... |